News Center-Henghe Electric Technology Melting,electrolysis, furnace

News

Matters needing attention when using intermediate frequency furnace

1. Before starting the furnace, check whether the electrical equipment, water cooling system, copper tube of the sensor are intact, otherwise it is forbidden to open the furnace.2. Furnace melting loss should be repaired in time if it exceeds regulations. Smelting is strictly prohibited in crucibles with excessive melting.3. The pouring site and the pit in front of the furnace should be free of obstacles and water, so as to prevent molten steel from exploding on the ground.

2020

03-17

Method for reducing electrode loss in electric furnace of intermediate frequency furnace

The main reasons for electrode wear in electric furnaces such as steel and intermediate frequency furnaces are: It is divided into two aspects: first, chemical loss caused by oxidation during the smelting process, and second, physical loss caused by broken electrodes.

2020

03-17

Why is the energy saving and environmental protection of the intermediate frequency furnace?

In the smelting industry, if it is said which type of smelting equipment is most recommended, many people in the industry will recommend intermediate frequency furnaces. The intermediate frequency furnace has many advantages over other melting furnaces, but what people value most is the performance of the intermediate frequency furnace in energy saving and environmental protection.

2020

03-17

< 1 2 3 >

Contact Us

Address: No.6 Huai Road, Huixing Xinyan Village, Hubin District, Sanmenxia City

Manager Wang:+86-5039854911

Chukchao:+86-8839810523

Mailbox:18839810523@163.com

Copyright©2023 Sanmenxia Henghe Electric Technology Co., Ltd. www.300.cn SEO This website supports IPv6

Business License